Wed Jul 08, 2015 1:04 pm
Mon Jul 13, 2015 4:55 am
Awesomemario128 wrote:How big is the program? Will it fit on this?www.amazon.com/gp/aw/d/B00NLAMS9C/ref=mp_s_a_1_3?qid=1434937386&sr=8-3&pi=AC_SY200_QL40&keywords=arduino+mini&dpPl=1&dpID=51PlS70kajL&ref=plSrch
Mon May 01, 2017 11:11 am
== Gamebuino Hardware Interface ==
Arduino Gnd - Gamebuino ICSP GND
Arduino Pin D11 (PB3) - Gamebuino ICSP MOSI
Arduino Pin D13 (PB5) - Gamebuino ICSP SCLK
== Video Hardware Interface ==
Arduino Pin A0 --------> 1k resistor (sync) -----------+-------> Composite PAL Out
Arduino Pin A1 --------> 470 ohm resistor (video) -------^
Fri May 05, 2017 1:30 pm
Thu May 18, 2017 3:51 pm
Sat May 20, 2017 1:34 pm
Mon May 22, 2017 12:45 am
Mon May 22, 2017 1:41 am
ry755 wrote:This is so cool! Just wondering, is this NTSC or PAL?
The SS pin is useful for packet/byte synchronization to keep the slave bit counter synchronous
with the master clock generator. When the SS pin is driven high, the SPI slave will immediately
reset the send and receive logic, and drop any partially received data in the Shift Register.
Tue Jul 11, 2017 12:46 pm
Mon Aug 07, 2017 1:20 pm